What-Is-a-Ridge-Vent.jpg

What Are Ridge Vents and Does Your Roof Need One?

There are many different types of roof vents, each coming with their own unique benefits. One of the most popular types of roof vents is a ridge vent. Even though these ventilation options are popular among roofing contractors, many homeowners don’t know what they are.

ridge vent

ridge vent

When you’re having a new roofing system installed on your home, or you need to schedule roofing repairs, you should make sure that you know about every roofing option available to you. When you know which type of roofing features to ask for, you can be sure that you’re getting the best possible features added to your roof.


What Is a Ridge Vent?

Whether you have a roof made of asphalt shingles, luxury slate, or wood shake, it is crucial that you have ventilation for your roof. Inside your home, heat rises. That’s why your attic or upper crawlspace are always so hot. Roof venting allows that heat to be released.

A ridge vent runs the entire length of the ridge of your roof. One of the primary benefits of these vents is the fact that they are not visible from the ground.


Types of Ridge Vents

There are two different types of ridge vents. The type of ridge vent that you need depends on the ventilation system in your attic.

  1. If your attic has an active ventilation system, you should choose a ridge vent with a baffle. Active ventilation means that your attic’s ventilation system relies on fans that circulate the air around. Baffled ridge vents are vents that have chutes that provide a route for airflow in your attic.
  2. Passive ventilation systems rely on natural wind movements to circulate air through your attic. These ventilation systems are often found in older homes. If this is the type of ventilation system that you have, you can opt for a ridge vent that does not have baffles.

One of the biggest benefits of ridge vents with baffle is the fact that they prevent rain, snow, and sleet from getting into your attic or upper crawlspace. Ridge vents that don’t have plastic chutes (or baffles) also allow insects to get in.


How Much Do Ridge Vents Cost?

The process of installing a ridge vent on your roof has a direct impact on the price. The materials needed for a ridge vent installation are some of the most affordable materials in the roofing industry. Based on national averages, ridge vent itself costs between $2 and $3 per linear foot.

There is some prep work that contractors must perform, which increases the price of ridge vent installation. In addition to removing any shingles or pieces of metal that cover the ridge of your roof, the contractor must also remove any underlayment that is in the way. Once your contractor removes everything from the ridge, he or she will cut a hole for the ridge vent that runs the entire length of your roof.

This process takes several hours, and is the biggest expense associated with ridge vent installation. A study of national averages indicates that roofing contractors charge somewhere between $45 and $75 per hour for the labor associated with ridge vent installation. Labor costs around $300 to $400 for ridge vent installs.

According to national averages, the total cost of ridge vent installation runs somewhere between $300 and $650. The typical cost for complete ridge vent installation is only $500.


Why Does Roof Ventilation Matter?

There are several reasons that you should make sure that your attic has proper ventilation. While there many different types of roof vents on the market, ridge vents provide some of the best ventilation. This is because roof vents run the entire length of your roof’s ridge, ensuring that air can always move in and out of your attic.

Roof ventilation is very important if you live in an area that sees high humidity. Since humidity is a measure of the level of moisture in the air, humid attics that do not have proper ventilation often become breeding grounds for mold and mildew. Not only does this damage the items that you have stored in your attic, but it can also make the air in your home dangerous to breathe.

Providing your roof with extra ventilation also protects the roofing structure itself. When air can pass through the roof on your home, certain roofing types, like shingles will better withstand damage due to extreme temperatures.

Frequently Asked Questions (FAQ)FAQ

Are ridge vents affordable to install?

Yes, they are. You can have a ridge vent installed in your home for a few hundred dollars.

Can I install my own ridge vent?

You shouldn’t try to install your own ridge vent unless you have training as a roofing contractor. Not only is it dangerous to work on your roof, but you may also cause significant damage to your roof.

Are ridge vents really necessary?

Yes, they are. Ridge vents help protect your roof and your attic from damages caused by poor circulation.

Having a quality ridge vent installed in your home not only makes your home safer and more comfortable, but it also adds years to the lifespan of your roof. If you don’t have a ridge vent, consider contacting a roofing contractor today.

Types-of-roof-vents.jpg

7 Types of Roof Vents

When you look at the roofs in your neighborhood, you probably see any number of items coming through them or sitting on them. All these different types of roofing accessories play important roles in the functionality of the roof and the home as a whole.

Types of Roof Vents

Types of Roof Vents

One of the most important types of roof accessories is roof vents. These vents not only ensure that attics and upper-level crawl spaces have good ventilation, but they also protect the roof itself. If you are in the market for a new roof, you will need to choose the right type of roof vent for your home.


Types of Ventilation

You can break roofing ventilation down into two separate types: active and passive.

Active ventilation includes fans pushing air through your attic or crawl space. If you have active ventilation, the ridge vent on your home has plastic flaps that allow air to pass through.

The price of roof vent installation depends on the number of vents you choose, the type of vents that you have installed, and some other factors. Based on averages, roof vent installation can cost anywhere between $150 and $2,000.

Passive ventilation does not require any fans. Letting air flow through the space naturally, passive ventilation does not require a ridge vent to have plastic flaps, also called baffles.

The best roof vent choice for your home largely depends on your climate. If you live in an area with high humidity, you should choose an active option that minimizes the amount of humidity in your attic.

The type of ventilation under your roof will dictate the type of vent you need.

First, let’s look at the different types of vents used in active ventilation.


Turbine Vents

Turbine VentsView in gallery

Turbine vents, also called “whirly birds,” are some of the most popular roof vents. These vents allow the air in your attic to recirculate 10 to 12 times per hour.

There is a common misconception about turbine vents. Many people believe that their makeup allows birds, debris, rain, and snow to enter your home. This only happens if the turbine vent suffers damage, at which point you need to have your vent replaced.


Power Vents

Power Vents

Power Vents

Power vents are circular vents you usually see near the ridge cap on a roof. These vents rely on electricity to pull hot air out of your attic, dispersing it into the air. These vents not only keep your attic cool but also help reduce the risk of humidity damaging the lumber and drywall used in your attic.

During wintertime, you should use your power vent with a humidistat. This helps maintain optimal humidity levels in your attic.

The only downside of power vents is that the engines are prone to fail because they run so much. If you opt for power vents, you should plan on replacing the motors every few years.


Solar Powered Vents

Solar Powered VentsView in gallery

Converting to solar power is a popular choice among homeowners, so it makes sense that roofing vent manufacturers offer solar-powered vents. These vents rely on energy provided by the sun to operate. Unfortunately, the vents do not run while the battery is charging, which may lead to difficulties during cloudy days.


Roof Ridge Vents with Baffle

Roof Ridge Vents with Baffle

Roof Ridge Vents with Baffle

Ridge vents that have baffle (plastic flaps) are a popular choice among homeowners. Roofing contractors cut these vents into the roof so they do not stick up, detracting from the beauty of your roof. They require you to install some mechanical fans in your attic, though.

Now that we’ve discussed the different types of active roof vents let’s look at your options if you opt for passive ventilation.


Ridge Vents Without a Baffle

Ridge vents without a baffle are a popular choice, primarily because they do not stick out of your roof. Instead, contractors cut these vents into the roof decking along your roof’s ridge. Unlike their active counterparts, these vents do not have a baffle.

The biggest issue associated with ridge vents that have no baffle is that birds and other outdoor elements can get into your attic.


Static Vents

Static Vents

Static Vents

If you see a roof that has small boxes on it, those are static vents. Static vents rely on convection to pull hot air out of your attic before pushing it out of your vent. Also referred to as box vents or turtle vents, static vents are the most common type of passive roof vents.


Gable End Vents

Gable End VentsView in gallery

Finally, gable end vents provide ventilation to your roof without actually being in your roof. Instead, a roofing contractor can cut these vents into the side of your home, just below the peak. When the wind blows outside, these vents allow the air in your attic to flow through the vents and out the sides of your homes.

Having a roof ventilation system not only makes your attic more comfortable but it also plays an important part in expanding the lifespan of your roof. You should work with your roofing contractor to choose the best type of roof vent for your home.

What-Type-of-Roof-Ventilation-is-Best-1024x721.jpg

The Basics of Roof Ventilation

Roof ventilation is one of the most important aspects of keeping your home comfortable and making your roof last longer. Based on basic laws of convection, warm air rises. With that in mind, you must determine the best way to release that hot air from your roof.

roof venting

roof venting

In the same way that you need consistent airflow throughout your home, your roof also requires airflow—understanding why airflow matters and how to improve it is an essential part of home ownership.


Why Roof Ventilation Matters

One of the most important aspects of roof ventilation is releasing hot, humid air from your roof into the air around your home. Humidity measures the amount of moisture in the air, so when humidity builds up in your attic, the moisture level in the air increases.

Most ceilings aren’t sealed perfectly, which allows warm air to flow from your living quarters into the attic. When the insulation and lumber in the attic encounter this moist, humid air, the possibility for damage increases. Not only does this allow lumber to rot, but mold and mildew can grow on the surfaces in your attic.

Your climate will largely determine how much roofing ventilation you need. Most building codes require that you have one square foot of roof venting for every 300 square feet of roofing. This is a minimum standard. You can never have too much roof ventilation.

Roof ventilation doesn’t only impact your home during warmer months. When winter comes, a poorly ventilated attic may get so hot that it melts the snow on your roof. Since the eaves of your home remain cold, ice dams form along the edge of your roof. If your roof has asphalt shingles, these ice dams allow water to pool and eventually penetrate the surface of your shingles.

Proper ventilation can add years to your roof’s lifespan depending on the type of roofing finish. If the bottom layers of an asphalt shingle roof face too much heat, the shingles may crack. Proper ventilation helps reduce the likelihood that asphalt shingles suffer damage.


What Type of Roof Ventilation is Best?

Within the world of roof ventilation, you have multiple options. Roof ventilation comes in two types: active and passive.

  1. Active ventilation relies on a system of mechanical fans in the attic of your home. These fans work together to pull fresh air from outside your home while simultaneously pushing warm, stagnant air out of your attic.
  2. Passive ventilation does not involve fans, allowing air to flow naturally in and out of your attic or upper-level crawlspace. While passive ventilation is more energy efficient, it is not as effective in many climates.

Depending on the type of roof ventilation you choose and the number of vents you have installed, roofing ventilation installation costs anywhere between $300 and $2,000.

The type of roof vents that you install on your home will determine which type of roof ventilation you have. If you want active ventilation, you will choose between turbine vents (also called “whirly birds “), solar vents, powered vents, or ridge vents with a baffle. Baffles are plastic flaps that open and close, allowing air to flow in and out of the ridge vent.

Passive vents include static vents and ridge vents without baffles. Unfortunately, the absence of baffles on passive ridge vents makes it easy for bugs, debris, water, snow, and other elements to get into your home.

Roofing contractors can also cut passive ventilation into the side of your home. One of the most popular types of passive ventilation is gable vents. Roofing contractors cut these vents into the side of your home just below the peak of your roof. They rely on wind hitting both sides of your home, creating a constant flow of air going in and out of the upper portion of your home.


Signs of Faulty Roof Ventilation

You must know how to determine the effectiveness of your roof’s current ventilation. Not only does doing so reduce the likelihood of bacterial growth in your attic, but it can also lead to lower utility bills.

You don’t have to be a roofing contractor to determine that you need increased ventilation in your roof. One of the most effective ways to assess ventilation needs is to go into your attic. If the air is humid and feels “sticky,” you should consider installing additional roofing ventilation.

You can also recognize the need for improved ventilation during winter months. After a snowstorm, go outside and compare your roof to your neighbors’ roofs. If their roofs are free from snow but you still have snow on your roof, you probably need to improve the ventilation in your roof.

Having adequate ventilation in your roof is an integral part of extending the lifespan of your roof. If you notice increased temperatures in your attic, snow buildup on your roof, or any other signs of poor ventilation, you should contact a roofing contractor immediately.

Grant-Cardone.jpeg

27 Real Estate Influencers on Instagram

Social media is becoming a marketing powerhouse for Real Estate influencers. With over 2.89 billion monthly active users, Instagram seems to be the preferred channel for influencer marketing.

Real Estate influencers use social media for marketing property listings and seeking out potential clients.

Here’s a list of the top Real Estate influencers on Instagram.


Grant Cardone

Grant Cardone

Grant Cardone, otherwise known as the ‘10x guy’ owns and operates numerous companies. He is a real estate mogul, author, philanthropist, and international speaker.

Cardone Capital links investors with profitable real estate projects. The multi-million dollar real estate empire cuts across Alabama, Arizona, Georgia, Texas, California, Florida, North Carolina, and Tennessee.

  • Bio: UndercoverBillionaire
  • CardoneCapital Over $4B AUM
  • Instagram Handle: @grantcardone
  • Location: Sunny Isles Beach, Florida

Ryan Serhant

Ryan Serhant

Ryan Serhant is the founder and CEO of Serhant. The real estate company brokers luxury properties in New York, South Florida, The Hamptons, and Long Island.

Serhant has a significant following on Instagram, where he showcases some of the properties for sale. He also stars in “Million Dollar Listing New York” and “Sell It Like Serhant.”


Fredrik Eklund

Fredrik Eklund

Fredrik Eklund is the co-founder of EKLUNDGOMES alongside John Gomes. As a Real Estate Board of New York member, Eklund greatly influences New York listings. You will find some of his listings on Instagram and catch a glimpse of his family.

  • Bio: God first | Father of twins, selling the most exclusive real estate in Cali, New York, Texas, Nevada, and Florida.
  • Instagram Handle: @fredrikeklundny
  • Website: 64universityplace.com
  • Location: New York

Tony Giordano

Tony Giordano

Tony Giordano is a celebrity real estate broker and president of Giordano Industries. He is also a real estate coach and speaker.

Giordano’s latest publication, “The Social Agent 2.0 Update,” advises realtors to build their brands on social media. Giordano is the founder of The Opulent Agency, which lists luxury real estate worldwide.

  • Bio: @CNBC @DrCryptoRE
  • Board @propy.inc
  • #SellingCA #RealEstate
  • @BravoTV
  • @theopulentagency
  • Sports & Ent. Relo
  • #Speaker #Coach
  • 💍 @london.giordano
  • Instagram Handle: @tony_giordano
  • Location: Los Angeles

Barbara Corcoran

Barbara Corcoran

Barbara Corcoran is the founder of The Corcoran Group, which she sold for $66 million in 2001. She is a shark on a popular American business reality show, Shark Tank. The Real Estate agent and entrepreneur engages a massive audience on her Instagram and Youtube channel.

Through her website, Barbara helps clients locate real estate agents. You can visit her page if you’re looking to sell or buy your home. Corcoran’s book, “Shark Tales,” is an Amazon best-seller in business books.


Josh Altman

Josh Altman

Josh Altman is a part of The Altman Brothers, a top real estate agency in Los Angeles. Josh ranks in the top 1% of realtors in the world. He has closed residential deals worth more than $1.5 billion throughout his career. Altman stars on the reality television show ‘Million Dollar Listing Los Angeles.’

  • Bio: LA’s #1 Realtor | Bravo’s Million Dollar Listing LA | Speaker | Best Selling Author | For Bookings & Inquiries email casey@thealtmanbrothers.com
  • Instagram Handle: @thejoshaltman
  • Location: Los Angeles

Jake Leicht

Jake Leicht

Jake Leicht specializes in flipping houses, rentals, leasing, and financing. Leicht holds mentorship programs that share new ways to flip houses and make a profit. He also buys commercial properties for development.

Leicht is the founder and president of Strategic Enterprises, which deals in property management, construction, technology, and more.

  • Bio: 🏚Flipping houses in today’s market
  • 💰Leveraging 100% OPM (Other People’s Money)
  • Instagram Handle: @jakeleicht
  • Location: Temecula, California

Jordan Cohen

Jordan Cohen

Jordan Cohen showcases properties on his website, Instagram page, and Twitter. He is renowned for his luxury listings on Access Hollywood and Extra. With 30+ years in the industry, a significant part of Jordan’s clientele consists of celebrities and professional athletes.

  • Bio: #1 Remax Agent-Worldwide 🌎
  • Over 310 Million in Annual Sales. First winner of the Inman Top Luxury Realtor award #luxuryrealestate
  • DRE#01103362
  • Instagram Handle: @jordancohen1
  • Website: www.jordancohen.com
  • Location: California

Chad Carroll

Chad Carroll

As a real estate broker, Chad Carroll boasts over $4B in sales. The Carroll Group lists residential and investment properties in South Florida and New York. Since 2012 Chad Carroll has been a broker at Compass, a luxury real estate brokerage firm.

  • Bio: 4.5 Billion Sold! Florida’s Top Real Estate Broker 848M Sold in 2021 – #1 Agent Compass Florida
  • 📧 Info@TheChadCarrollGroup.com
  • ☎ 305-400-9507
  • Instagram Handle: @chadcarroll
  • Website: thechadcarrollgroup.com
  • Location: South Florida

Graham Stephan

Graham Stephan

Graham Stephan is a fast-rising real estate influencer. He started at 18 and boasts over $125 million in sales. He coaches real estate professionals through his online course, The Real Estate Agent Academy. Graham Stephan also runs a popular YouTube channel with over $10M views and 4M+ subscribers.

  • Bio: Personal Finance Enthusiast / Real Estate Investor
  • 4 Million Subscribers on YouTube
  • Instagram Handle: @gpstephan
  • Website: grahamstephan.com
  • Location: Las Vegas

Sharelle Rosado

Sharelle Rosado

Sharelle Rosado is the founder and CEO of Allure Realty. She is a top real estate broker in Miami and Tampa, Florida. She also serves as a consultant to other realtors. Allure Realty brokers luxurious properties in Charlotte, North Carolina. Rosado specializes in military and veteran relocations.


Kristoffer Andrew Krohn

Kristoffer Andrew Krohn

Kris Krohn is a top social media realtor. He has a massive following on Instagram and TikTok. Kris Krohn seeks to inspire others to achieve financial freedom through his social media influence. He also creates real estate content on YouTube and hosts ‘Have It All.’

Krohn is the founder of The Strongbrook Group. The group of companies consists of a real estate firm, a mortgage brokerage, property management, a life insurance firm, and a client coaching team.

  • Bio: Over $1B In Transacted Real Estate
  • 1M+ Tiktok | 870k+ YouTube
  • Text Me +1 (385) 217-3477
  • Instagram Handle: @kriskrohn
  • Location: Orem, Utah

Tracy Tutor

Tracy Tutor

Tracy Tutor is a top agent at Douglas Elliman Beverly Hills. Tracy has represented notable companies and iconic architects with million-dollar listings in Los Angeles. The business mogul has been featured on Business Insider, E! News and People, and more.

  • Bio: WSJ Best Selling Author:
  • Fear is Just a Four-Letter Word
  • Bravo’s Million Dollar Listing LA
  • Luxury Real Estate Agent | Mama
  • Co-Founder of @unsweetwine
  • Instagram Handle: @tracytutor
  • Location: Brentwood, California

Julia Wang

Julia Wang

Through social media marketing, Julia Wang rose to become a famous real estate broker in 2020. She is one of Houston’s Top 20 Under 40 Rising Stars in Real Estate. Julia Wang holds a broker license in Texas and brokers at NextGen Real Estate.

  • Bio: CEO/Broker of @nextgen_tx; chosen as the #1 Texas and Houston Realtor on Social Media; Top 100 Agents in the United States (#6) 💜
  • Instagram Handle: @juliawang_htx
  • Social Home Page: juliawanghtx.me
  • Location: Houston, Texas

Tom Ferry

Tom Ferry

Tom Ferry is the founder and CEO of Ferry International. The company coaches realtors in the real estate business. Tom is a highly sought-after real estate coach and speaker. On his Instagram, he shares tips on how to become a successful realtor. Tom Ferry is also the author of “Life! By Design” and “Mindset, Model, and Marketing!”

  • Bio: Your Strategy Coach
  • #1 Real Estate Coaching Company
  • 🛫 Entrepreneur
  • 🗣 Speaker
  • 💵 Investor
  • Instagram Handle: @tomferry
  • Social Home Page: linktr.ee/tom_ferry
  • Location: San Francisco, CA

Ricky Carruth

Ricky Carruth

Ricky Carruth is a top realtor in Alabama. He also runs a training program for real estate agents, which provides insights into real estate practices and trends. He leads The Carruth Team, focusing on the Gulf Coast Real Estate market. Ricky shares real estate insights on his Instagram page and a few posts of his family.

  • Bio: 🏡 20 Year Real Estate Agent
  • 💰$1B in Sales
  • 🙇 Coaching Agents For Free Since 2017 @zerotodiamond
  • 💬 I answer DMs
  • 💍 @karlincarruth
  • Instagram Handle: @rickycarruth
  • Location: Orange Beach, Alabama

Josh Kilby

Josh Kilby

Josh Kilby is a real estate agent and a business coach. The real estate guru owns The Kilby Collective. He posts inspirational videos on his Instagram page. He also hosts webinars to help realtors grow their businesses.


Clayton Morris

Clayton Morris

Clayton Morris is a real estate investor. He is a former news anchor at Fox News Channel and got into real estate to earn some passive income. He helps investors acquire rental properties across 14 states in the U.S. Morris hosts “Investing in Real Estate,” a podcast set to guide beginners on real estate trends.


Haleigh Booth

Haleigh Booth

Haleigh Booth is a popular real estate influencer on Instagram and TikTok. She is a TikTok star with 1.5M followers on her account. The realtor shares photos of her personal life and tips for purchasing or selling property.


Ariane Ellsberry

Ariane Ellsberry

Ariane Ellsberry lists property on her Instagram and website. The real estate guru attributes her success to social media exposure. She is an agent at Watson Realty Co. Ariane also trains real estate agents on how to use social media to build a successful brand.


Luis Iglesias

Luis Iglesias

Luis Iglesias brokers luxury properties in South Florida. He has worked with celebrities and executives in his career and is the founder of Iglesias Realty Group. He reaches potential clients via Instagram and other social platforms. Iglesias attributes his success to social media marketing and gaining a massive online following.


Demetres Giannitsos

Demetres Giannitsos

Demetres Giannitsos is among the best real estate influencers in Toronto, Canada. He is a member of eXp Realty Canada, a notable real estate brokerage firm. Giannitsos gained popularity after joining Big Brother Canada season 5. Clients can find his listings on his personal Instagram page and website.


Chelsea Peitz

Chelsea Peitz

Chelsea Peitz’s best sellers “What to Post” and “Talking in Pictures” guide real estate professionals on creating a notable brand through social media.

The former Realtor also goes in-depth in her workshop, coaching her audience on Instagram content creation.

She shares her experience building a social media following and growing in the Real Estate industry. Chelsea Peitz also hosts “The Voice of Social Sales” podcast.

  • Bio: Chelsea l Real Estate Video Marketing+Social Media. Coaching camera-shy real estate & mortgage humans to show up online as the real YOU🤩 Keynote Speaker | Author of What to Post
  • Social Home Page: linktr.ee/chelsea.peitz
  • Instagram Handle: @chelsea.peitz
  • Location: Phoenix, Arizona

Dennis & Yana Chernov

Dennis & Yana Chernov

Dennis Chernov is an executive realtor and a team leader of The Chernov Team. The team became a part of The Agency’s Sherman Oaks location. His wife, Yana Chernov, heads operations and marketing in the firm. The Chernov Team is a top real estate agency with over $3 billion in sales volume.

  • Bio: Luxury Real Estate

#1 Top Selling Team in San Fernando Valley

#6 out of 1.25 million agents in Los Angeles

@dennischernov

Lic. # 01850113

  • Instagram Handle: @chernovteam
  • Location: Sherman Oaks, California

Bryan Casella

Bryan Casella

Bryan Casella is a top real estate broker and coach. The renowned speaker hosts various events and training programs for realtors. He is also a team leader at Team BC. His team helps clients sell and buy homes across the U.S. Casella’s YouTube channel focuses on how to make sales as a realtor and career tips.


Jordan Nielsen

Jordan Nielsen

Jordan Nielsen is the founder and CEO of ListerPros, a real estate media company. He trains real estate agents in professional photography and videography. Jordan’s humor and memes on his Instagram page set him apart from other influencers.


Dottie Herman

Dottie Herman

Dottie Herman is among the most famous realtors in New York. Dottie has received numerous awards throughout her career for her work and contribution to society. Dottie Herman is the Vice-Chair of Douglas Elliman, which she co-founded in 2003.

She relays inspirational messages on her Instagram for other realtors and entrepreneurs like her. Dottie also hosts a radio show, Eye on Real Estate, which is all about real estate.

  • Bio: Vice-Chair@douglaselliman Real Estate, the nation’s 3rd largest firm | Radio Host | Forbes’ Most Successful Self-Made Woman in Real Estate
  • Instagram Handle: @dottieherman
  • Social Home Page: dottieherman.com/poll
  • Location: New York City, Southampton, and Palm Beach

The post 27 Real Estate Influencers on Instagram appeared first on Homedit.

Brand-of-Shingles.jpg

What Brand of Shingles Is the Best?

What’s the best brand of shingles? Once you’ve set on shingles for your finish, you’ll need to pick a brand, and there are many.

Brand of Shingles

Choosing the best shingles for your home includes considering several factors, including climate, installation contractor, and more. While GAF and CertainTeed are the most popular names on the list, all the manufacturers we discussed provide quality products.

How much do new shingles cost?

The brand of shingles you choose will impact your price. According to national averages, new shingles cost between $8,000 and $9,000.

Should I buy the cheapest shingles?

Buying the cheapest shingles on the market is not the best choice. Instead, y look for dependable, long-lasting shingles, even if they cost a little more.

Best Shingle Brands

Before making this big decision, learn all you can about the pros and cons of different shingle brands.


Malarkey Roofing Products

Malarkey Roofing Products

Founded in 1956, Malarkey Roofing Products makes some of the best asphalt shingles in the industry. Malarkey manufactures multiple types of shingles, including 3-tab shingles, architectural, dimensional, designer, luxury, and premium.

One thing that sets Malarkey apart from the pack is their use of “rubberized” asphalt in all of their shingles. It’s not uncommon for shingle companies to use this higher grade of asphalt in their premium options, but Malarkey is the only company that uses it in all their products. Even though Malarkey is one of the smallest companies on our list, they are one of the best.


IKO

IKO

IKO, founded in 1951, is one of the most successful shingle companies in the industry, with an estimated value of more than $1.17 billion. They make a wide variety of shingles, including 3-tab shingles, dimensional, architectural, designer, luxury, and premium.

IKO’s long-term success is based on the fact that they provide affordable shingles without sacrificing quality.

Consumer Reports provides an annual report on the performance of different shingles, and IKO consistently appears on their list for top-notch performance. In addition to their shingles, IKO also makes roofing accessories, cover board, modified bitumen, and other roofing materials.


Owens Corning

Owens Corning

Owens Corning, founded in 1938, is one of the oldest companies on our list, in addition to being one of the most successful, with an estimated value of more than $8 billion. They offer a variety of products, including 3-tab shingles, architectural, dimensional, designer, premium, and luxury shingles.

One of the most appealing aspects of choosing Owens Corning shingles is their warranty program, one of the most generous in the industry. Owens Corning offers a certification process to installers, which ties into the warranty. If you choose their product and an Owens Corning certified contractor, you can receive a warranty that protects your shingles for up to 50 years.


TAMKO

TAMKO

Founded in 1944, TAMKO provides 3-tab, dimensional, architectural, premium, luxury, and designer shingles. They also manufacture accessories, specialty underlayment, waterproofing products, and modified bitumen rolls.

TAMKO has an estimated value of approximately $500 million, putting it a little lower than the other companies on this list. That is because they focus on the middle and lower end of the market.

Much like Owens Corning, they also offer a certification program for installers, which increases your warranty program. Depending on the type of shingle you choose and the contractor’s certification status, you can get a warranty that protects your shingles for up to 30 years.


Atlas Roofing Corporation

Atlas Roofing Corporation

Founded in 1982, Atlas is one of the younger companies on our list. In their 40 years on the market, they have positioned themselves as a company that provides consumers with many options.

Much like the other companies we’re discussing, Atlas offers 3-tab shingles, architectural, dimensional, luxury, premium, and designer models. In addition, Atlas also offers a variety of colors, which helps set them apart from competitors.

Many industry professionals consider Atlas as the company that provides the best value for the money, and warranties range between five and 20 years.


CertainTeed

CertainTeed

While Atlas is one of the youngest companies on our list, CertainTeed is one of the oldest. Founded in 1904, CertainTeed has been manufacturing quality shingles for nearly 120 years.

CertainTeed provides contractors with a certification program, which impacts the warranty you receive on their products. These warranties vary based on the product but range from five to 10 years.

CertainTeed, estimated at more than $2 billion, has one of the best reputations in the roofing industry. Don’t be surprised if your roofing contractor encourages you to use CertainTeed, as many industry professionals believe they’re the best manufacturer.


GAF

GAF

GAF is not only the oldest company on our list (founded in 1886), but they’re also the most financially successful, with an estimated value of $3 billion. In addition to offering 3-tab shingles, dimensional, architectural, premium, luxury, and designer shingles. GAF also manufactures various other roofing products, including roll roofing, slate roofing, ventilation products, solar roofing products, fiber cement siding, modified bitumen, and more.

GAF shingles are less expensive than CertainTeed, making them a popular choice. They have been in the industry the longest, so they must do something right.


Final Thoughts

Choosing the right type of shingles is an investment in your home’s long-term viability. Speak to your roofing contractor about which brands they recommend. You can also use the information provided here as a good starting point.

Many brands offer high-quality products, but your location, design, needs, and budget will determine which is right for you.

The post What Brand of Shingles Is the Best? appeared first on Homedit.

What-Are-Your-Roof-Layers.jpg

What Are Your Roof Layers?

Unless you have a background in roofing, construction, or carpentry, you probably don’t realize how many roof layers make up a well-constructed roofing system. When you look at your roof, you see the finish.

What Are Your Roof Layers?

Whether you choose asphalt shingles or durable slate tiles, you probably aren’t aware of how many layers it takes to make your roofing system functional.

If you are preparing for a new roof installation at your home or want to be more aware of how to look out for roofing problems, it’s important to understand the different layers that comprise your roof.


Roof Decking

Roof decking, also referred to as “roof sheathing,” serves as your roof’s foundation. Your roof has joists, which attach to your walls to create the roof’s pitch. Roof decking attaches to those joists.

The presence of roof decking provides a sturdy, level surface for every layer of your roof to attach to. In the same way, your home has a foundation, your roof requires a foundation. Roof decking is the foundation for the rest of your roof.


Drip Edge

Protecting the roof decking from water is one of the most important aspects of a quality roofing system. Drip edge, which attaches to the perimeter of your roof, helps make that a reality.

Many local governments require contractors to install a drip edge when installing a roof. The drip edge prevents water from getting under the layers that we will discuss in a moment. It also protects the sheathing, adding years to the lifespan of your roof.


Ice and Water Shield

While a drip edge protects the outer perimeter of your roof, an ice and water shield protects valleys and peaks. In roofing, valleys are areas where two slopes meet. Without the presence of an ice and water shield, water may pool up in those areas.

You should have an ice and water shield installed in every valley on your roof. Also, having at least one row of ice and water shield on each side of your roof’s peaks prevents water from damaging your decking.


Roof Underlayment

Roof underlayment forms a type of membrane that further protects your roof decking from the elements. When choosing a roof underlayment, you can select between 15-pound felt, 30-pound felt, and synthetic underlayment. Each type of underlayment has its own list of pros and cons, so the roofing contractor you choose can help you make the best choice for your roof.

While you should never choose the cheapest roofing materials, this is even more true when dealing with underlayment. Quality underlayment protects every inch of your roof decking, which further protects your ceilings and the contents in your home.


Starter Shingles

It is important to note that starter shingles are only necessary if you have asphalt shingles installed on your home. If you choose an alternative roofing finish, such as copper, there is no need for starter shingles.

While similar to asphalt shingles, these shingles have different dimensions and provide a starting point for traditional shingles. It is vital to have starter shingles installed in a uniform manner, as they dictate the overall look and performance of your shingled roof.


Roofing Finish

Once your roofing contractor installs all the base layers, he or she can install the roofing finish you have chosen. You can choose from dozens of roofing types, from basic asphalt shingles to complex concrete tiles.

Each type of roofing finish comes with its own list of benefits. When choosing a roofing finish, consider the overall design of your home, the amount of weight your house can support, and how long you want a roof to last.


Roof Flashing

Flashing refers to a piece of metal that roofing contractors install at specific places on your roof. For instance, if your roof has a chimney, the contractor will install flashing around the sides. The flashing deflects water away from areas prone to water damage.

There are different types of roof flashing. The type you choose will largely depend on your roof finish. In all cases, roof flashing should outlive the roof.


Ridge Caps

Protecting your roof’s valleys from water damage is important. But it’s just as important to protect the peaks. At every point that your roof peaks, the contractor you choose should install a ridge cap. This cap, made of the same material as your roof’s finish, covers the ridges of your roof, ensuring water can’t get through.


Roof Vents

Roof vents are an essential part of ventilating your home. These vents are necessary if you have an attic or crawl space above your ceiling. Your contractor will allow you to choose between active and passive ventilation systems, each with a list of benefits.


Frequently Asked Questions (FAQ)FAQ

What is the most important layer of a roof?

Each layer of a roof plays a role in protecting your home. With that in mind, no layer is more important than the others.

How much does it cost to have a new roof installed?

Determining the cost of a new roof depends on a variety of factors. The materials used, the size of your roof, and local labor costs will all dictate the final price of your roof.

Do I really need roof vents?

Roof vents provide proper ventilation for your attic or upper crawlspace. Ventilation helps prevent bacterial growth, such as mold and mildew. It also keeps your roof decking from suffering damage from the inside.

Final Thoughts

Understanding the different layers of a roof is an important part of home ownership. Not only does it allow you to plan for roof repair or replacement, but you can also keep an eye out for problems with more detail.
( function( $ ) {
$( ‘.faq-section .faq-q’ ).on( ‘click’, function( event ) {
event.preventDefault();
$( this ).closest( ‘.faq-item’ ).toggleClass( ‘toggled’ );
});
})( jQuery );

The post What Are Your Roof Layers? appeared first on Homedit.

What-Is-an-Ice-and-Water-Shield.jpg

What Is an Ice and Water Shield?

An ice and water shield is a membrane that protects your home from moisture. Although you may not know it, one of the most important parts of your roof is a layer you can’t see: the ice and water shield.

What Is an Ice and Water Shield?

Whether you choose a luxurious slate roof or a traditional asphalt shingle roof, the roof’s finish is the only visible part. Your roof has multiple layers, each of which plays a vital role in protecting your belongings, family, and home from the elements.

When professionally installed, these layers come together to form a roof system. Homeowners should understand the various components to keep an eye out for problems that require professional repair and replacement.

One of the most essential parts of your roofing system is the ice and water shield – here’s what you should know about it.

What Is an Ice and Water Shield?

The primary purpose of an ice and water shield is to protect your roof’s sheathing. Decking (or sheathing) is the layer of plywood that attaches to the joists in your roof.

The underlayment and roof finish attach to this decking. While those layers provide some protection, it’s also important to have an ice and water shield in place. Plywood absorbs water, so installing an ice and water shield on top of that plywood layer ensures that your sheathing doesn’t become water-logged.

Do I Need an Ice and Water Shield?

Certain roof areas, like valleys, need ice and water shields. A roofing valley occurs when two slopes meet to form a “valley” in the roofing. Since water flows towards these areas, having an ice and water shield under the roof finish is necessary.

Another factor determining if you need an ice and water shield is your roof’s pitch. Roofs with pitches of 2/12, 3/12, and 4/12 should have ice and water shields from one end to the other. Flatter roofs hold more water, making an ice and water shield necessary.

Also, consider the climate. Coding laws require homes above the US snowline to have an ice and water shield. The shield must run along the roof’s edge to prevent ice from damming after a heavy snowstorm.

If you live in an area that faces heavy annual snowfall, plan on installing two rows of shield to your roof’s eaves and peaks.

Three Types of Ice and Water Shield

You can choose from three ice and water shield types: granular, smooth, and high heat. Understanding the makeup of each type and how they benefit your home ensures that you make the right choice.


Granular

A granular ice and water shield has a sandpaper-like finish, much like asphalt shingles. Roofing contractors install this type of shield in roof valleys. Even though granular shields are the thinnest option of the three, they perform well, especially in areas where snowfall isn’t too heavy.


Smooth

Smooth surface ice and water shields are ideal for low-pitch roofs. If your roof has a pitch of 2/12, 3/12, or 4/12, a contractor will recommend this type of shield in most cases.


High Heat

High-heat ice and water shield have cotton-like fibers that make them the thickest option of the three. This type of ice and water shield is ideal for metal roofs, especially those in areas above the US snowline.


Frequently Asked Questions (FAQ)FAQ

How much does it cost to have an ice and water shield installed?

The cost of roofing materials varies from region to region, but we can look at national averages to get a good idea of the cost of ice and water shields. Granular shield costs around $50 per 100 square feet. Smooth shield costs around $100 per 100 square feet. High heat shield costs approximately $125 per 100 square feet.

How long should my ice and water shield last?

Many types of ice and water shield come with a lifetime warranty.

Should I use ice and water shield on my entire roof?

You are certainly allowed to cover your entire roof in ice and water shield, but it probably isn’t necessary. Instead, let a roofing contractor tell you where ice and water are more likely to “pool” and have the shield installed in those areas.

Final Thoughts

An ice and water shield is integral to protecting your home from the damage caused by water and ice. Even though you can’t see this layer of roofing, it does the hard work of protecting your home from leaks.

If you’re planning to have a new roof installed on your home, talk to your contractor about installing an ice and water barrier at potential risk areas on the roof.
( function( $ ) {
$( ‘.faq-section .faq-q’ ).on( ‘click’, function( event ) {
event.preventDefault();
$( this ).closest( ‘.faq-item’ ).toggleClass( ‘toggled’ );
});
})( jQuery );

The post What Is an Ice and Water Shield? appeared first on Homedit.

What-Is-Drip-Edge.jpg

What is Drip Edge, and Do I Need It?

When you look at your roof, you see the finished product. You probably don’t realize that your roofing system has multiple layers of different materials that come together to create the roof that protects you, your family, and your home’s contents. Most homeowners are not aware of all these layers and how they protect their homes.

A drip edge on your roof is essential to a quality roofing system. Learn what a drip edge is and why it’s such an important component of your roof.

What Is Drip Edge?

What is Drip Edge, and Do I Need It?

The drip edge is a type of metal flashing that roofing contractors install along the edge of a roofing system. The primary purpose of this drip edge is to keep water away from your roof’s fascia, which prevents water from getting under your roof’s finish.

Even though your roof has a membrane under it that reduces the likelihood of water damage, you need to have a drip edge to reduce the amount of water that reaches the membrane. Underlayment, whether felt or synthetic, is not designed to deal with a lot of water.

You’ll also have to replace your old drip edge when replacing your roof. This is important because some roofing contractors will leave it out of your estimate. Leaving out the drip edge allows them to provide a lower estimate to beat their competitors’ prices. If you receive an estimate that doesn’t include drip edge installation, you should insist on it.

One of the benefits of a drip edge is that it extends your roof’s lifespan. When water can’t get under the edge of your roof, your sheathing, underlayment, and roofing finish benefit from this added layer of protection.

Do I Have to Have a Drip Edge?

Depending on where you live, building codes may require you to install a drip edge on your roof. Local codes and ordinances often require homeowners to have a drip edge on their roofs to reduce the risk of homes becoming damaged by rain, ice, and snow.

These codes also sometimes dictate the drip edge installation process. For instance, local codes may require a drip edge overlap of no less than two inches. Even if you don’t live in an area with a drip edge requirement, you should still probably install one regardless.

Your contractor will know if your local government requires installing a drip edge. As a homeowner, you should take the time to inform yourself about local ordinances before installing or repairing your roof. That way you’ll know what your roofing contractor is talking about when they review their estimate with you.

Signs of Damaged Drip Edge

Because of its position in your roofing system, drip edge isn’t easily damaged. The drip edge goes between your roof’s underlayment and the finish. When properly installed, the drip edge barely sticks out over the edge of your roof. This helps reduce the likelihood of your drip edge suffering damage.

High winds can damage your drip edge. In some cases, high winds can even peel back asphalt shingles. Those same high winds can potentially bend the drip edge on your home.

Heavy hailstones may also damage your drip edge. Depending on the type of roof on your home, hail stones can cause cracks to form. The drip edge is very thin, so big hailstones can bend, dent or crack it.

If you notice water spots on your ceilings, especially those around the edge of your home, you probably have damaged the drip edge. Look around the spots where your external walls meet your ceilings for brown spots after heavy rainfall.

How much does drip edge replacement cost?

The drip edge is one of the most affordable parts of your roof. Based on national averages, drip edge costs approximately $2.00 per linear foot, including labor, drip edge installation on an average-sized home costs around $1,000.

Does drip edge come with a warranty?

Yes. Most drip edge manufacturers include a warranty that covers the replacement cost for up to 20 years.

A properly installed drip edge protects your home’s interior while adding years to your roof’s life expectancy. Being informed about every part of your home’s roofing system not only ensures that you know how to look for signs of damage but also helps you plan for the cost of having your roof repaired or replaced.

The post What is Drip Edge, and Do I Need It? appeared first on Homedit.

What-is-Roof-Decking.jpg

What is Roof Decking?

Your roof is more than the layer of shingles, copper, or slate you see when you look at your home from the street. A quality roofing system has multiple layers, each of which is important in protecting you, your family, and your belongings from the elements. 

What is Roof Decking?

Underneath your roof’s finish is one of the most important parts – the roof decking. Read on to learn what roof decking is, its role in your roof system, and how to detect signs of damage.


What is Roof Decking?

Also referred to as “roof sheathing,” roof decking is a term that refers to the layer of lumber that makes up the frame of your roof. The decking’s layer of wooden boards provides something for your roof’s underlayment and finish to attach to.

There are two types of roof decking, plank decking, and sheet decking. Plank decking is much older and was popular before plywood came on the market. Instead of large sheets, plank decking has rectangular wooden boards. These boards are either 1x6s or 1x8s.

The other type of roof decking is sheet decking which is more common in homes today. Sheet decking comes in two forms: plywood and OSB. OSB is the most popular type, made of wood chips and strips of wood that manufacturers compress together.

Regardless of the type of roof decking you choose, allow a roofing professional to install it. Having roof decking installed the right way ensures your roof system has a stable foundation to attach to. It also reduces the likelihood your roof will suffer damage.


When Should I Replace My Roof Decking?

No hard and fast rule determines when you should replace your roof decking. The roof decking will be brand new if you have a new home. If you’ve purchased an existing property, the decking will be of mixed quality since different parts of the roof decking age at different rates.

If any part of your roof’s finish suffers damage, the decking becomes exposed to the elements. The exposure expedites the aging process. Even though your roof has a membrane that protects the decking, exposure to the elements can lead to damage.

When you hire a roofing contractor to install a new roof on your home, they will inspect your current roof decking. In most cases, there will be some areas in your roof decking that need replacing. For example, you’ll need to replace any boards that show rot or water damage before your contractor can install a new roof.


How Much Does New Roof Decking Cost?

Lumber prices have been increasing for several years, making new roof decking more expensive. If you plan to use sheet decking, you’ll have to choose between traditional plywood and OSB. OSB plywood, which is more durable, has an average cost of $49 per sheet. A single sheet is 4 feet tall and 8 feet wide.

Traditional plywood is much harder to price, as many types and thicknesses exist. Plywood prices can range from $12 to $55 per sheet. It is important to note that plywood costing as little as $12 is not suited for roofing.

Frequently Asked Questions (FAQ)FAQ

How long should roof decking last?

Most roofs last at least 20 years. Some sheets of plywood that make up your roof decking may last longer, while others may suffer damage earlier. A durable roofing material, such as slate, increases the lifespan of your roof decking.

What is the purpose of roof decking?

The primary purpose of roof decking is to provide a foundation for the rest of your roofing system. Roof decking also helps hold your home’s walls together, providing structural integrity.

Should I repair or replace my own roof decking?

If you notice damage to your roof decking, you should contact a roofing contractor as soon as possible. Trying to repair your own roof decking is dangerous, especially if you don’t know what you’re doing. Not only could you put yourself in danger, but you may cause additional damage to your roof.

Final Thoughts

Even though you rarely see your roof’s decking, it’s one of the most critical layers. Not only does roof decking provide structural stability to your home, but it also supports the roof finish you’ve chosen. 

If you believe your roof decking is damaged, contact a roofing contractor as soon as possible.
( function( $ ) {
$( ‘.faq-section .faq-q’ ).on( ‘click’, function( event ) {
event.preventDefault();
$( this ).closest( ‘.faq-item’ ).toggleClass( ‘toggled’ );
});
})( jQuery );

The post What is Roof Decking? appeared first on Homedit.

What-is-Underlayment.jpg

Why Choose Synthetic Roof Underlayment

When you look at your roof, you only see the external finish, not the felt or synthetic roof underlayment underneath.

If you have a copper roof, you see large sheets of beautiful copper that give your home a sleek, clean look. If you have a clay tile roof, you see thick architectural tiles that add depth to your property. But, multiple layers make up a quality roofing system. 

Underneath the finish, your roof has a layer of plywood sheathing, followed by underlayment. Underlayment provides protection between your roof’s finish and your home. Quality underlayment shields your home from the elements while adding years to your roof’s life.

You can choose different types of underlayment: traditional felt and synthetic plastic. Here’s what you should know about each.

What is Underlayment?

What is Underlayment?

Your roof has three layers. The base layer, referred to as decking or sheathing, consists of sheets of thick plywood. These sheets give something for your underlayment and shingles to attach to and provide structural stability.

The external layer is your roof finish. When you chose your roof’s finish, you considered the aesthetic appeal and the functionality. You probably didn’t know that the long-term viability of your roof depends on the underlayment.

Underlayment serves as a type of membrane. It provides a layer of moisture resistance and ensures that the shingles, metal, or tile do not degrade the decking. While you don’t see your underlayment when you look at your roof, it is arguably the most important component.

What is Felt Roof Underlayment?

Traditional underlayment, a felt-like material, comes in 15- and 30-pound rolls. While 15-pound felt provides a more affordable option, it is prone to tearing, unlike its 30-pound counterpart. 

The primary downside of felt is its weight. The finish on your roofing is heavy, and adding unneeded weight, such as 30-pound felt, adds to the load your home must support. Plus, traditional felt underlayment is expensive to repair.

What is Synthetic Roof Underlayment?

Instead of felt and fiberglass, synthetic underlayment is made of woven or spun polypropylene or polyethylene. Synthetic underlayment hit the market approximately 20 years ago and immediately provided roofing contractors with a lighter material that doesn’t sacrifice quality.

Is Synthetic Underlayment More Durable?

You want your contractor to use quality materials that will last for decades. Many homeowners only think of their roof’s finish, but it’s essential to pick a durable underlayment. Synthetic underlayment has a longer life expectancy than traditional fiberglass underlayment. 

Standard felt underlayment can tear when faced with high winds and during installation. Even a tiny tear creates an opportunity for water to get into your home, where it can wreak havoc.

Synthetic underlayment is water-resistant and hard to tear. Fiberglass underlayment, on the other hand, absorbs water. In ideal situations, very little water reaches the underlayment, but your roofing finish can suffer damage if water gets in. The water resistance of synthetic underlayment makes it a superior option.

Synthetic underlayment also does a better job of holding roofing nails and screws, such as the type used in metal roofing. Providing a better grip for these fasteners helps ensure that water cannot leak around them.

Frequently Asked Questions (FAQ)FAQ

Is synthetic underlayment more expensive than fiberglass underlayment?

Felt or fiberglass underlayment costs approximately $5.00 per square foot. Synthetic underlayment costs around $7.00 per square foot. While synthetic fiberglass comes with a higher price tag, its durability makes it worth it.

Which type of underlayment is safer to work on?

Synthetic underlayment comes with a skid-proof finish, making it a safer option for roofing contractors. While it may seem like a minor factor, when contractors can move around on your roof with more ease, they can reduce the labor cost.

How long does synthetic underlayment last?

Most brands of synthetic underlayment come with a warranty ranging from 25 to 50 years. Felt underlayment lasts a maximum of 20 years.

Final Thoughts

Choosing the right type of underlayment adds years to the lifespan of your roof. A durable and lightweight product like synthetic underlayment lightens the load and creates a watertight seal.

Since traditional felt underlayment can be heavy and prone to rips, it’s no surprise that many homeowners choose synthetic underlayment.
( function( $ ) {
$( ‘.faq-section .faq-q’ ).on( ‘click’, function( event ) {
event.preventDefault();
$( this ).closest( ‘.faq-item’ ).toggleClass( ‘toggled’ );
});
})( jQuery );

The post Why Choose Synthetic Roof Underlayment appeared first on Homedit.